REAR DISC BRAKE
A face-to-face 2-piston type made from aluminium has
been adopted for the rear disc brakes in vehicles for
Europe, and floating caliper single piston type has been
adopted in vehicles for General Export, GCC and
Australia.
In addition, a drum in disc method is used with a parking
brake built into the brake disc.
For safety, there is an audible wear indicator in the inner
side of the pad to warn when the limit of pad use has
been reached.
Clearance is automatically adjusted by pressing on the
brake pedal.
<Vehicles for Europe>
Backing plate
Brake shoe
d
uster
14F0124
Brake shoe
14F0039
14F0122
Wear indicator
DRIVE-CONTROL COMPONENTS - Service Brakes 3-33
Adjuster
Backing plate
<Vehicles for General Export, GCC and Australia>
14N0162
Wear indicator
14N0131
Brake shoe
14F0039
14N0086
Brake shoe
To Next Page
Loading...
