BUMPERS
Bumpers that seem to be an integral part of the body
are installed.
• To improve safety, both front and rear bumpers
have built-in bumper absorbers to absorb shock.
• The side of the front bumper bends around to the
wheel cut and line up with the fender so that the
flash surfaced body is realized.
<Front Bumper>
TPO (Thermo Plastic Olefin elastomer) is used as
the material for the bumper face and, by improving
molding precision, it seems to be one unit with the
body with no gaps between bumper and body.
<Rear Bumper>
Outlet
18F0017
EXTERIOR - Bumpers 5-
To Next Page
Loading...
