A 4 wheel independent suspension system has been
adopted, with the front suspension of a MacPherson
strut type, and the rear suspension of a double
wishbone type. In addition, 4WS is equipped in all
models.
FEATURES
1. Adoption of electronic control suspension (ECS)
2. Adoption of 4 wheel independent suspension
3. Adoption of wide tread tyres
4. Optimization of suspension geometry
5. Adoption of pillow ball type stabilizer links
6. Optimization of spring characteristics of suspension bushing
7. Adoption of a liquid filled bushing as the front suspension
lower arm bushing
1. Adoption of double elastic supported suspension members
2. Optimization of coil spring offset amount
3. Adoption of large-sized bump rubber
1. Full realization of sel
-diagnosis for ECS system
2. Adoption of a camber adjustment mechanism in the front
suspension
3. Adoption of camber and toe-in adjustment mechanisms in the
rear suspension
3-2 DRIVE CONTROL COMPONENTS - Suspension
SUSPENSION
Improved steering stability
and riding comfort
Improved riding comfort
Improved serviceability
To Next Page
Loading...
