<When buckle switch is OFF>
memory tape and, while the memory tape is loose,
torque is not transferred to the bushing shaft. When
the memory tape is wound completely tight, the
elongation ratio of the normal spring and reducing
spring is the same and the webbing is wound up by
the torque of the 2 springs. In this way, the condition
of the 2 springs is uniform when stored.
<When wound up>
19N0079
6-12 INTERIOR - Seat Belt
Buckle Switch ONÆ When Seat Belt is Initially
Wound Up
When the tongue is released from the buckle with the
ignition switch ON, the switch inside the buckle is
turned OFF, current to the solenoid is cut off and the
meshing of the lever and tape holder is released.
s a result, the reducing spring begins winding. On
the other hand, the normal spring turns the tape
holder in the direction of winding and winds tight the
To Next Page
Loading...
