0-12 GENERAL - Technical Features
Propeller Shaft
• 3-section 4-joint type propeller shaft with two center bearings.
• Robro joint to absorb lengthwise and angular change and prevent transmission of vibrations.
• Anti-vibration type propeller shaft (rear propeller shaft) to reduce vibration and noise from the drive train.
8+9 inch tandem brake
booster to reduce the
force needed to depress
the brake pedal.
X-arrangement of lines that
maintains balanced braking in
front and rear even if the
hydraulic system is lost.
4-wheel anti-lock braking
system (4ABS) using 4-
sensor, 2-channel lock
method.
Dual proportioning valve
for control of rear wheel brakin
.
Face-to-face and different diameter 4-
piston front ventilated disc brake with
stable braking force and good braking
feeling.
Rear Suspension
• Double wishbone type independent suspension for
outstanding riding comfort.
• Electronic control suspension (ECS) for both stable
handling and riding comfort.
Rear Axle
• BJ-TJ type constant velocity joint with high transmission
efficiency and minimum vibration and noise.
• Viscous coupling type limited-slip differential.
Rear drum-in-ventilated disc
brake with built-in parking
brake and featuring good
braking stability.
Brake
To Next Page
Loading...
