Items Specifications
Suspension system Double-wishbone type
Camber -0
°
10' ± 30'
Toe-in mm (in.) 0.5 ± 2.5 (0.02 ± 0.10)
Coil spring
Wire dia. x 0.D. x free length mm (in.). 12.2 x 117.2 x 379.3 (0.48 x 4.61 x 14.93)
Coil spring identification colour Blue x 2
Spring constant N/mm (kg/mm, Ibs./in.) 28.0 (2.8, 157)
Shock absorber
Type Hydraulic, cylindrical double-acting type
Stroke mm (in.) 203 (8.0)
Damping force [at 0.3 m/sec. (0.984 ft./sec.)]
Expansion N (kg, Ibs.) Hard: 1,710 (171, 377)
Medium: 1,160 (116, 256)
Soft: 560 (56, 123)
Contraction N (kg, Ibs.) Hard: 1,010 (101, 223)
Medium: 880 (88, 194)
Soft: 670 (67, 148)
Stabilizer bar
Mounting method Pillow ball type
0.D. mm (in.) 22 (0.86)
12F0036
G-sensor
3-8 DRIVE-CONTROL COMPONENTS - Electronic Control Suspension (ECS)
REAR SUSPENSION
Front shock absorber (R.H.)
(Built-in F.R. position
detection switch and
F.R. damping force
changeover actuator)
ECS switch ECS indicator lamp
Steering wheel
angular velocity
sensor
Rear shock absorber (R.H.)
(Built-in R.R. position
detection switch and
R.R. damping force
changeover actuator)
ECS control unit
Rear shock absorber (L.H.)
(Built-in R.L. position
detection switch and
R.L. damping force
changeover actuator)
Diagnosis
connector
Stop lamp
switch
Front shock absorber (L.H.)
(Built-in F.L. position
detection switch and
F.L. damping force
changeover actuator)
Throttle position
sensor
Vehicle
speed
sensor
To Next Page
Loading...
