Function
hart
S: SOFT M: MEDIUM H: HARD
Anti-Rolling Control
CONTROL START
Change to a higher damping force according to the control map for
the vehicle speed and steering wheel angular velocity which
depends on the operation of the steering wheel.
CONTROL HOLD
After switching to a high damping force and holding that condition for
1 second, return to normal damping force (SOFT).
High Speed Response Control
CONTROL START
When vehicle speed exceeds 130km/h (81 mph) in the TOUR mode,
the damping force changes from SOFT to MEDIUM to improve high
speed stability.
CONTROL HOLD
Damping force which is changed to MEDIUM is held while the
vehicle speed is over 120km/h (75 mph) but when it falls to 120km/h
(75 mph), the damping force returns to SOFT.
DRIVE-CONTROL COMPONENTS - Electronic Control Suspension (ECS) 3-17
To Next Page
Loading...
