Mitsubishi 800 Series - Page 105

7. Operating Utility Functions MELSEC GOT
7.10 Monitoring the(=ircuits of the PC CPU Sequence Program (CkuSt
Monitor)
Point
The following operations are necessary for circuit monitoring.
@ Install the memory card in the GOT.
@ Install the OS from the graphics software to the GOT.
Display screen
Example
of screen
x0001 x0002
Ready Start
display operation ready
4: "I 4voon
instruction
t
TO
25
7
Start
warning
Inh
Ish
Functions
Sequence programs of the PC CPU can be monitored.
Other stations on the network system can be monitored (within the same network
only).
Monitoring can be switched between the main and sub programs.
Operations
(a) Basic operations
Operations are carried out by touching the monitor screen.
For detailed information, please refer to the A870GOT Graphic Operation Terminal
Operating Manual (Expanded Functions Manual).
(b) Returning to the utility menu screen
Touching the returns to the monitor screen.
7-10