Mitsubishi 800 Series - Introduction; Contents

Introduction
Thank you for purchasing the Mitsubishi Graphic Operation Terminal.
Before using the equipment, please readthis manual carefully to develop full familiarity with
the functions and
performance of the graphic operation terminal you have purchased,
so as to enswe correct use.
Please forward a copy of this manual to the end user.
Contents
1. Overview
1.1 Features ................................................................................................................................... 1 - 1
1.2 Structure and Guide to the Use of
This Manual ........................................................................ 1 - 8
1.3 Abbreviations and Symbols Used in This Manual ..................................................................... 1-1 0
1.4 Parts Supplied with This Product .............................................................................................. 1-1 3
1 .5 Precautions When Installing the ROM-BIOS/OS ...................................................................... 1-1 4
2. System Configuration 2- 1 to 2-38
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.1
0
2.1 1
Equipment Required for A870GOT
............................................................................................ 2- 1
System Configuration When Creating Monitor Screens
............................................................ 2- 2
System Configuration Used for Data Transmission, Debugging, and Document Creation
......... 2- 3
2.3.1 System configurtation
.................................................................................................. 2- 3
2.3.2 RS-232C cables used for data transmission
............................................................... 2- 3
System Configuration When Monitoring Through CPU Direct Connection
................................ 2- 4
System Configuration and Precautions When Monitoring Through a Bus Connection
.............. 2- 5
System Configuration and Precautions
When Monitoring Through a Calculator Link Connection (RS-422 Communication)
.................. 2- 6
2.6.1 System configuration
................................................................................................... 2- 6
2.6.2 Precautions regarding the system configuration
.......................................................... 2- 7
2.6.3 Hardware settings for the calculator link module ......................................................... 2- 9
2.6.4 Hardware settings for the serial communications module
............................................ 2-10
System Configuration When Monitoring Through a MELSECNET Connection
(Connected to a Data Link System)
.......................................................................................... 2-1 1
System Configuration When Monitoring Through a MELSECNET Connection
(Connected
to a Network System) ........................................................................................... 2-12
System Configuration When Connecting to the MELSEC-FX Series
......................................... 2-1 3
2.9.1 When connected to the
FXo, RON, FXos, and FX~N series ............................................ 2-1 3
2.9.2 When connected to the
FX1 and FX2, FX2c series ....................................................... 2-1 4
2.9.3 System configuration precaution items
....................................................................... 2-1 4
System Configuration When Connecting to the Omron PLC
.................................................... 2-1 5
2.1 0.2 System configuration when connecting to the C200Ha series ..................................... 2-1 9
2.1 0.3 System configuration when connecting to the CQMl
.................................................. 2-22
2.1
0.5 System configuration when conneced to CV1000 ....................................................... 2-28
2.11.1 Overview
..................................................................................................................... 2-30
2.1 1 .2 System configuration
................................................................................................... 2-30
2.1 0.1 System configuration when connected to the
C200H and C200HS ............................ 2-1 5
2.10.4 System configuration when connecting to the C1 OOOH and C2000H .......................... 2-25
System Configuration When Connecting to the Microcomputer
............................................... 2-30
2.11.3 About themtion
Gables ....................................................................................... 2-31
-1 -