7.
Operating
Utility Functions
MELSH:
GOT
Example
of
screen
H/Q9m
11E3/40
(FRI)
T
1
CHANGE
t
+
SELECT
+I
SET
*
The date and time displayed in the setting window are those shown when the clock
setting screen
is
displayed. The time most recently set is always shown at the upper
right
of
the screen. After you have finished entering the settings, check this time at the
upper right of the display.
I
i
Functions
0
On the clock controlled by the PC CPU, the date, time, and day can be set.
Ish
Operations
(a) Basic operations
Items are selected by touching them and keys.
Numeric values are changed
by
touching them and keys.
Touching them key sets the clock data
in
the PC CPU.
(b) Returning to the utility menu screen
Touching the returns
to
the monitor screen.
-
Point
The clock setting should be entered when the system is booted.
When using a sequence program or similar program on the PC CPU side to read and write
If the PC CPU connected to the
GOT
does not have a clock function, this function cannot
clock data, settings for the clock data cannot be entered properly using this function.
be selected on the Utility menu.
Y
I
f
I
f
.
I
T-
11
To Next Page
Loading...
