5.
Handling
Component Equipment
Modules
MELSEC
GOT
Inh
Precautions regarding handling
r.
..
The following precautions should be observed when handling memory cassettes.
The memory cassette
is
made
of
resinous materials,
and
should be protected from
strong shock or impact.
Do
not separate the
PC8
of
the memory cassette
from
the case, as this can result in
a breakdown.
Be
careful to keep foreign matter such as wire scraps out
of
the memory cassette. If
foreign matter does get into the cassette, remove it right away.
When installing the memory cassette in the GOT, press it firmly against the connector.
Do
not set the memory cassette on any metallic material which is or may be leaking
electricity,
or
on
any wood,
plastic,
vinyl, textile, or
paper
surface which may conduct
static electricity.
Do
not touch the leads of the memory cassette. This can cause the memory to be
destroyed.
Do
not touch the connector that connects the memory cassette to the GOT. Touch-
ing this connector can cause defective contact.
5-3
To Next Page
Loading...
