Mitsubishi AE-200E User Manual

12
WT07627X03
Setting item Description LCD
Initial Setting
Tool
Web Browser for
Initial Settings
Function
settings
Set Temperature Range
Limit
Set to restrict the local remote
controller set temperature range.
V
Night Mode (quiet operation)
Schedule
Set to switch outdoor units to quiet
operation for a certain period of
time.
V
System-changeover
Set to automatically switch indoor
unit operation mode (heating
and cooling) based upon room
temperature and set temperatures.
V
External Temperature
Interlock
Set to interlock the temperature
differential between the set
temperature and the outdoor air
temperature to use automatic
adjustment.
V V
Night Setback Control
Set to automatically cool or heat if
the indoor temperature goes outside
a set range at night.
V V
Interlock control
Set interlock restrictions for interlock
operation when conditions have
been met.
V
*6 *6
AHC Port Name settings
Advanced HVAC CONTROLLER
(AHC) port name can be set.
V
Night purge
Set night purge to bring in cooler
outside night air.
V V
BACnet
®
*2
BACnet
®
objects can be set.
Floor settings
Floor settings
Set monitoring by displaying the
floor layout using the LCD.
V V
Floor settings for Integrated
Centralized Control Web
Set monitoring by displaying the
floor layout using the Integrated
Centralized Control Web.
V
Billing
function
settings
Billing Function settings
Apportioned electricity billing
function settings can be made.
V
*1
Outdoor Unit settings
Set outdoor unit parameters for
electric energy apportionment.
V
*1
Indoor Unit settings
Set indoor unit parameters for
electric energy apportionment.
V
*1
Measurement settings
Set connection relationship for
electric energy apportionment
metering devices and units.
V
*1
Charges settings
Time period setting for the seasonal
charges can be made.
V
*1
User settings
User settings for LCD
Set functions and passwords
that can be used with the LCD.
(Maintenance user/building
manager)
V
User settings for Integrated
Centralized Control Web
*3
Set general user and tenant
manager settings for Integrated
Centralized Control Web.
Maintenance
Data back-up/import
Save settings data to a USB
memory device. Also, this can
write settings data saved on
a USB memory device to the
AE-200/AE-50/EW-50 to restore
status.
V V
Software update
Update AE-200/AE-50/EW-50
software.
V V
Others
Check sheet for air-
conditioner ON/OFF trial run
A check sheet to be used for air
conditioning unit trial run can be
output.
V
*1 For details, refer to the Instruction Book (Apportioned Electricity Billing Function).
*2 Make the settings on the BACnet
®
Setting Tool. Refer to the Instruction Book (BACnet
®
Setting Tool).
*3 Make the settings on the Integrated Centralized Control Web. Refer to the Instruction Book (Integrated Centralized Control Web).
*4 LAN2 IP address (IPv4) for BACnet
®
can be set. IP address (IPv6) can be set only from the BACnet
®
Setting Tool.
*5 “Energy Management License Pack” is required. (AE-200E/AE-50E/EW-50E only)
*6 “Interlock control” license is required. On version 7.50 and later, make the settings from the Initial Setting Tool.

Mitsubishi AE-200E Specifications

General

Brand	Mitsubishi
Model	AE-200E
Category	Control Systems
Language	English