124
WT07627X03
[2] Creating the login destination centralized controller for backup
Multiple login destinations can be set for the Integrated Centralized Control Web.
By copying the login destination centralized controller floor settings and preparing a backup centralized controller,
then if the login destination centralized controller malfunctions, it is possible to use the Integrated Centralized
Control Web by logging in to the backup centralized controller.
Note: Air conditioning unit groups managed by a malfunctioning centralized controller are not covered by monitoring and operation.
In the event of a malfunction, promptly replace with a new product and configure.
(1) Add an IP address of the backup centralized controller in 6-3-1 “System Configuration settings”.
(2) Configure the centralized controller to be normally logged in.
Configure the 6-5-3 “Floor settings for Integrated Centralized Control Web” and 6-5-4 “Floor Layout settings for
Integrated Centralized Control Web” settings for Integrated Centralized Control Web login destination target
centralized controller.
(3) From [Floor Settings], click [Floor for Integrated Centralized Control Web], and from [Target centralized
controller], select the backup centralized controller.
Normally logged-in centralized controller
Wireless LAN router
Normally
logged-in
LAN
Tablet
AE-200
AE-50/EW-50
AE-50/EW-50
AE-50/EW-50
AE-200
Backup centralized controller
Max. 50 units
Max. 50 units
Max. 50 units
Max. 50 units
Max. 50 units
Backup log-in
Malfunction
Target centralized controller for the normally logged in centralized
controller
Target centralized controllers for the backup centralized
controller
Select the backup centralized controller.
Copy floor settings
To Next Page
Loading...
Need help?
General
