Mitsubishi AJ65BT-R2N-U-HW User Manual

16
POINT
(1) When MELSOFT connection mode is used, turn OFF SW1 to
SW8.
If any of SW1 to SW8 is ON, the setting error (RUN LED is
OFF) may occur.
(2) Unless data are sent concurrently from the AJ65BT-R2N and
external-device sides in Nonprocedural protocol mode,
communication at 57600bps or 115200bps is available.
If data is communicated simultaneously, the RS-232 receive
overrun error (BB23
H) may occur.

Mitsubishi AJ65BT-R2N-U-HW Specifications

General

Brand	Mitsubishi
Model	AJ65BT-R2N-U-HW
Category	Controller
Language	English