EasyManuals Logo

Mitsubishi ASX 2016 User Manual

Mitsubishi ASX 2016
452 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #175 background imageLoading...
Page #175 background image
CAUTION
l
Before driving, be sure that the parking
brake is fully released and brake warning
lamp is off.
If you drive without the parking brake fully
released, the warning display will appear on
the information screen in the multi-informa-
tion display.
If a vehicle is driven without releasing the
parking brake, the brake will be overheated,
resulting in ineffective braking and possible
brake failure.
Warning lamp
Warning display type 1
Warning display type 2
CAUTION
l
If the brake warning lamp does not extin-
guish when the parking brake is fully re-
leased, the brake system may be behaving
abnormal.
Have your vehicle checked immediately.
For details, refer to “Brake warning lamp”
on page 5-45.
Parking
E00600601664
To park the vehicle, fully engage the parking
brake, and then move the gearshift lever to 1
st
or “R” (Reverse) position for vehicles equip-
ped with M/T, or set the selector lever to “P”
(PARK) position for vehicles equipped with
A/T or CVT.
Parking on a hill
To prevent the vehicle from rolling, follow
these procedures:
Parking on a downhill slope
Turn the front wheels towards the kerb and
move the vehicle forward until the kerb side
wheel gently touches the kerb.
On vehicles equipped with M/T, apply the
parking brake and place the gearshift lever
into the “R” (Reverse) position.
On vehicles equipped with A/T, CVT, apply
the parking brake and place the selector lever
into the “P” (PARK) position.
If necessary, apply chocks to wheels.
Parking on an uphill slope
Turn the front wheels away from the kerb
and move the vehicle back until the kerb side
wheel gently touches the kerb.
On vehicles equipped with M/T, apply the
parking brake and place the gearshift lever
into the 1
st
position.
On vehicles equipped with A/T, CVT, apply
the parking brake and place the selector lever
into the “P” (PARK) position.
If necessary, apply chocks to wheels.
NOTE
l
If your vehicle is equipped with A/T, CVT,
be sure to apply the parking brake before
moving selector lever to the “P” (PARK) po-
sition. If you move the selector lever to the
“P” (PARK) position before applying the
parking brake, it may be difficult to disen-
gage the selector lever from the “P” (PARK)
position when next you drive the vehicle, re-
quiring application of a strong force to the
selector lever to move from the “P” (PARK)
position.
Parking
6-07
OGAE15E5
Starting and driving
6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi ASX 2016 and is the answer not in the manual?

Mitsubishi ASX 2016 Specifications

General IconGeneral
BrandMitsubishi
ModelASX 2016
CategoryAutomobile
LanguageEnglish

Related product manuals