Mitsubishi ASX 2016

Moving the gearshift lever to
the “R” (Reverse) position
E00615400100
Vehicles equipped with 5M/T
To shift into the “R” (Reverse) position from
5
th
gear, move the gearshift lever to the “N”
(Neutral) position, and then move it to the
“R” (Reverse) position.
Vehicles equipped with 6M/T
Pull up the pull-ring (A), then move the gear-
shift lever to the “R” (Reverse) position with
the pull-ring still pulled.
CAUTION
l
Do not pull up the pull-ring (A) when mov-
ing the gearshift lever to any position other
than the “R” (Reverse) position. If you al-
ways pulled up the pull-ring (A) when mov-
ing the gearshift lever, you could uninten-
tionally move the gearshift lever to the “R”
(Reverse) position and cause an accident
and/or a transmission fault.
The pull-ring will return to its original posi-
tion when you return the gearshift lever to the
“N” (Neutral) position.
CAUTION
l
If the pull-ring will not return from the
pulled-up position, we recommend you to
have the vehicle inspected.
Manual transmission*
6-24
OGAE15E5
Starting and driving
6