Mitsubishi ASX 2016

Licence plate lamps
E01004602093
1. When removing the lamp unit (A), push
it towards the left side of the vehicle
body.
2.
Remove the socket (B) and bulb assem-
bly by turning it anticlockwise.
3. Remove the bulb by pulling it out.
4. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When installing the lamp, insert tab (C) first
then align and insert tab (D).
High-mounted stop lamp
E01004500593
NOTE
l
An LED, not a bulb, is used in the high-
mounted stop lamp.
Contact a MITSUBISHI MOTORS Author-
ized Service Point when there is a need for
repair or replacement.
Replacement of lamp bulbs
10-37
OGAE15E5
Maintenance
10