Q
®
®
®
®
®
®
®
®
power/program timer indicator
This indicator lights up in green when you tur:a the TV on; it
blinks in green when the timer is set and the T_s power is off.
power button (POWER)
Use to turn the TV on or off. When you turn the TV on, the
power indicator will light in green.
A!V reset button (_ RESET)
Press to reset, all audio and video functions to their normal
level or setting except for volume, the "Listen to:" function
(Stereo/SAP/Mono), speaker (off/on), and closed captioning.
volume controls (VOL, VOLUME)
Press the • button to turn up the volume and the • button to
turn down the volume.
channel controls (CH, CHANNEL)
Use the • button to switch to a channel wi.th a higher number
and the • button to switch to a channel with a lower number.
input button (INPUT)
Use to select the input source you wish to watch:
• TV channels
• The sources connected to Input 1 and Input 2
A/V memory button
Press repeatedly to switch the A/V memory positions of Stan-
dard, Music, Movie or News. (Models CS-32309, CK-3231()
only)
degauss button (DEGAUSS)
Use this button to correct color impurity. (Models CS-36309,
CS-40309, and CK-36310 only)
color purity adjustment switches
Set these switches according to the placeraent and position of
your TV. See "Adjusting the color purity" in Chapter 3.
(Front panel of model CK-36310 only. Also, found on rear
panel of models CS-36309 and CS-40309. Not available on
models CS-32309 and CK-32310.)
Overview of the Front Panel 13
To Next Page
Loading...
Need help?
General
