Changing channels
Your TV offers you four ways of changing channels once their
numbers have been programmed into channel memory:
• selecting channels one-by-one with the channel controls
• directly accessing a channel by pressing tile number buttons
• using the QuickView TM option to recall the last channel, or to
switch to a particular memorized channel
• using the SuperQuickView" function to alternate between
channels on a user-chosen list
Important:
To change channels faster, use either of the following procedures:
• Enter three digits for every channel number, using zeros where
needed. For example, enter 0,?4 to view channel 4 and 028 to
view channel 28.
• Press the ENTER button after selecting the number of the
channel. For example, press 4 and ENTER to view
channel 4.
Important: If you memorized channels using the Indoor/Outdoor Antenna, your
TV can receive antenna channels 2-13 (VHF) and 14-69 (UHF). If
you memorized channels using the Cable Antenna, your TV can
receive cable channels 1-125. If :you select a channel outside of the
memorized range, your TV will not change channels.
46 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
