TV+VCR+cable with a cable box
equipment yon will need
This hook-up will allow you to record scrambled channels while
viewing another channel. After you complete this hook-up, you
should set up your remote control to operate :your cable box. (See
"Using the remote control" in Chapter 3.)
To complete the hook-up, you'll
need:
• three lengths of coaxial cable
one two-way splitter
• one set of RCA pin-type audio
cables
one RCA pin-type video cable
(if connecting a standard VCR)
• one Super Video cable (S-VHS)
(if connecting an S-VHS VCR)
Basic Connections 31
To Next Page
Loading...
