[>Important:
Selecting the A/V Memory position
Your TV has four A/V Memory positions. Each A/V Memory
position contains preset picture and sound settings to best suit the
type of program you are watching. You can change or reset the,_e
memories as much as you like.
The four memory positions are:
"Standard" - - - normal picture and sound
"Music" - - - vivid picture and lively sound
"Movie" - - - soft picture and strong sound
'2qews" - - - optimized for listening to speech in news programs
[] rv Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Select AN Memory
J-_ ADJUST to select
ENTER to enter
r_7 MENU to exit menus
[] Select A!V Memory
[] Standard
[] Music
[] Movie
[] News
]ADJUST to select
ENTER to enter
[] CANCEL to reset
MENU to go back
0
0
Press the MENU button on the
remote conl:rol. The Main Menu
will appear on the screen.
Use the ADJUST buttons to
select "Select A/V Memory."
Press ENTER.
0 You will see the "Select A/V
Memory" screen.
O Use the ADJUST buttons to
select the desired A/V Memory
position.
You can press the CANCEI,
button to reset many of the
audio and video settings; for the
selected A!V memory position to
their factory settings. Pressing
CANCEL will not affect
changes made to volume, the
"Listen to:" function (Stereo/
SAP/Mono), speaker (off,on),
and closed captioning.
Press the MENU button to return to the MAIN MENU.
Models CS-32309 and CK-32310 only -- You can also select the A/V
memory position by pressing the A/V MEMORY button on the front
panel.
A/V Memory positions are specific to the currently selected input.
When you change your input, the last A/V memory position used
with that input is automatically selected. See "Selecting the input
source" in this chapter for information on choosing your input.
Getting Started 61
To Next Page
Loading...
Need help?
General
