(!)selectswitch
Yourremotecontrolhasfourcontrollayers:
theTVlayer,theVCRlayer,theDVD
layer,andtheAUDIOlayer.Youcanset
upeachoftheselayersto operateadiffer-
entpieceofequipment.Usethis switchto
selectthelayeryouwantto setuporuse.
@power button (POWER)
Use to turn the TV on or off. When you
turn the TV on, the power indicator on the
front panel of the TV will light in green.
(The select switch must be set to the TV
layer.)
(_)number buttons (0-9)
Use to select a channel number or to enter
a parental lock code.
(!) channel control (CHANNEL)
Press the top part of the button to change
to a channel with a higher number; press
the bottom part to change to a channel
with a lower number.
(_) volume control (VOLUME)
Press the top part of the button to turn up
the volume; press the bottom part of the
button to turn down the volume.
(6) SuperQuickView TM button (SQV)
Press to view channels you have
programmed into SuperQuickView
memory.
(7) QuickView TM button (QV)
Use this button to recall the last channel
viewed or to recall a memorized channel.
(See "Changing channels" in Chapter 3.)
(_)input button (INPUT)
Use to select the input source you wish to
watch:
• TV channels
• The sources connected to Input 1 and
Input 2
(_) mute control (MUTE)
Use to turn the sound off completely and to
restore it to its original volume.
(_)enter button (ENTER,)
Use this button after selecting a channel
number, after selecting an item from
the on-screen menu system, or with the
picture-in-picture mode.
(_)adjust buttons (A, V, ,, • )
After selecting an audio o1'video function,
use these buttons to adjust it. Also use
these with the picture-in-picture mode and
to select items in the menus.
(_ information button (INFO)
Use to view an on-screen _ummary of the
current settings for the TV or cable func-
tions and the display rela':ed to Extended
Data Services (XDS)
@
cancel button (CANCEL)
This button is used to cancel a channel
number, to clear a channel programmed
into SuperQuickView memory, and to clear
the settings of some on-screen menus.
@home button (HOME)
Press to return to regular TV viewing
from the on-screen meau:_, to turn off t!he
on-screen displays, and to cancel the closed
captioning.
@ sleep timer button (SLEEP)
Use to program the TV to turn off auto-
matically at a later time.
@ menu button (MENU)
Use this button to display the on-screen
menu system, which contains additional
instructions for special functions.
Overview of the Remote Control 17
To Next Page
Loading...
Need help?
General
