TV+ stereo audio system
equipment you will need
To hook-up an audio system, you will need:
• one set of RCA pin-type audio
ca os
procedure
0 Connect one end of RCA pin-type audio cables to the AUDIO
OUTPUT terminals on the back of the television. Use the red
cable to connect the right (R) channel and the white cable to
connect the left (L) channel.
@
O
Connect the other ends of this cable to the AUX IN terminals on
the back of the audio system.
Turn off the television's speakers. To do this, press the AUDIO
function button on the remote control until you see the
SPEAKER display. Set the speakers to "Off' by pressing the
ADJUST button. See "Adjusting the sound" :LnChapter 3.
O Set the audio system's input to the AUX positio_,_.
Audio system rear terminals
TV rear terminals
/ ,q-
nO_
White Lead _ _ Red Lead
%z
34 Chapter 2: Connecting Your TV
To Next Page
Loading...
Need help?
General
