Setting the clock (cont.)
[] Set the Clock
[] Auto clock: On
[-1 Day : Sunday
[] Time : 12:00 pm
r_ Time zone: Central
[] Daylight
savings :Off
]ADJUST to select
ENTER to enter
MENU to go back
If you follow daylight savings,
use the ADJUST buttons to
answer the question with "On."
Otherwise._ answer "Off:" Press
FNTER.
The automatic clock set up is
completed. The screen will
return to the :'First Time Setup"
menu.
Important:
The TV's clock will not be set until you tune your TV to a channel
that is broadcasting the time via Extended Data Services O[DS). If
your TV loses power, you will need to tune to that channel again to
reset your clock.
52
_Important: If you set "Daylight sax4ngs" to "On," your TV will adjust the clock
by one hour when daylight savings begins and ends.
[] Set the Clock
[] Auto clock: Off
[] Day : - -
E_] Time : :
_ ADJUST to select
ENTER to enter
MENU to go back
setting the clock yourself
• Use the ADJUST buttons or the
key pad to set "Auto clock" to
"Off." Press ENTER.
• Use the ADJUST buttons to
select the "Day." Press ENTER.
[] Set the Clock
[] Auto clock: Off
[] Day : Sunday
]Time : - - : .....
_ DJUST to select
ENTER to enter
[_ MENU togoback
• Use the ADJUST buttons or'
number buttons to set the
"Time."
• After you have set the "Day"
and "Time," press the ENTER
button to start the clock.
The screen will return to the "First
Time Setup" menu.
[] Set the Clock
[] Auto clock: Off
[] Day : Sunday
r_ Time : 12:oo pm
_ ADJUST to select
ENTER to enter
MENU to go back
Chapter 3: Operating Your TV
l_Important:
You can clear the time by pressing
_he CANCEL button when ":Auto
clock" is highlighted.
If you are receiving a VCR signal
on channel 3 or channel 4, tlhe
automatic setting may not work
correctly.
To Next Page
Loading...
Need help?
General
