SQV
_Important:
_Important:
Using SuperQuickView TM (cont.)
adding channels directly to the list with the remote
control's SQV button
O Use the channel controls or numbe:c buttons to tune the TV to
the channel you want to add to the list.
O Press and hold the SQV button fi)r about 2 seconds; the letters
"SQV" will appear under the channel number, indicating that
the channel has been added to SuperQuickView memory in the
next available position.
If the SuperQuickView memory is full, the letters "SQV" will flash
when you hold the SQV button for about 2 seconds. Use the steps
on the preceding page to replace a current SuperQuickView chan-
nel with a new channel.
Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time the channel number is
displayed, even if you tune to the channel in another manner.
78 Chapter 3: Operating Your TV
To Next Page
Loading...
Need help?
General
