Screen Cause Solution (Reference)
l
There is a fault in the electrical system.
l
Immediately stop the vehicle in a safe
place.
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
l
The engine is overheated.
l
Stop the vehicle in a safe place and take
corrective measures.
Refer to “Engine overheating” on page
8-04.
l
The automatic transmission (CVT) fluid
temperature is too high.
l
Refer to “INVECS-III CVT with 8-step
Sports Mode” on page 6-30.
l
You turned the ignition switch to the
“ON” position or put the operation mode
in ON without fastening your seat belt.
l
Fasten your seat belt properly. Refer to
“Seat belt reminder” on page 4-10.
l
There is a fault in the fuel system.
l
We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Indication lamp, warning lamp, and information screen display list
5-28
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
