EasyManuals Logo
Home>Mitsubishi>Automobile>ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017 User Manual

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
CAUTION
l
If the temperature in the braking system con-
tinues to increase due to continuous brake
control on a slippery road surface, the in-
dicator will blink. To prevent the brake sys-
tem from overheating, the brake control of
the traction control function will be tempora-
rily suspended.
The engine control of the traction control
function and normal brake operation will not
be affected. Park your vehicle in a safe
place.
When the temperature in the braking system
has come down, the indicator will be
turned off and the traction control function
will start operating again.
NOTE
l
The indicator may turn on when you start
the engine. This means that the battery volt-
age momentarily dropped when the engine
was started. It does not indicate a malfunc-
tion, provided that the indicator goes out im-
mediately.
l
When a compact spare tyre has been put on
your vehicle, the gripping ability of the tyre
will be lower, making it more likely that the
indicator will blink.
ASC warning lamp/display
E00619401815
If an abnormal condition occurs in the sys-
tem, the following warning lamp/display will
turn on.
Warning lamp
- ASC operation indicator
- ASC OFF indicator
Warning display
CAUTION
l
The system may be malfunctioning.
Park your vehicle in a safe place and stop
the engine.
Restart the engine and check whether the
lamp/display goes out. If they go out, there
is no abnormal condition. If they do not go
out or appear frequently, it is not necessary
to stop the vehicle immediately, but we rec-
ommend you to have your vehicle inspected.
CAUTION
l
If the 2WD vehicle is towed with the igni-
tion switch in the “ON” position or the oper-
ation mode in ON and only the front wheels
or only the rear wheels raised off the ground,
the ASC may operate, resulting in an acci-
dent. When towing the 2WD vehicle with
the front wheels raised, keep the ignition
switch in the “LOCK” or “ACC” position or
the operation mode in ACC or OFF. When
towing the vehicle with the rear wheels
raised, keep the ignition switch in the
“ACC” position or the operation mode in
ACC. Refer to “Towing” on page 8-20
Cruise control
E00609102425
Cruise control is an automatic speed control
system that keeps a set speed. It can be acti-
vated at approximately 30 km/h (20 mph) or
more.
Cruise control
6-55
OGKE18E1
Starting and driving
6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi ECLIPSE CROSS 2017 and is the answer not in the manual?

Mitsubishi ECLIPSE CROSS 2017 Specifications

General IconGeneral
BrandMitsubishi
ModelECLIPSE CROSS 2017
CategoryAutomobile
LanguageEnglish

Related product manuals