CAUTION
l
When you do not wish to drive at a set
speed, turn off the cruise control for safety.
l
Do not use cruise control when driving con-
ditions will not allow you to stay at the same
speed, such as in heavy traffic or on roads
that are winding, icy, snow-covered, wet,
slippery, on a steep downhill slope.
l
On vehicles with M/T, do not move the
gearshift lever to the “N” (Neutral) position
while driving at a set speed without depress-
ing the clutch pedal. The engine will run too
fast and might be damaged.
NOTE
l
Cruise control may not be able to keep your
speed on uphills or downhills.
l
Your speed may decrease on a steep uphill.
You may use the accelerator pedal if you
want to stay at your set speed.
l
Your speed may increase to more than the
set speed on a steep downhill. You must use
the brake to control your speed. As a result,
the set speed driving is deactivated.
Cruise control switches
A- CRUISE CONTROL ON/OFF switch
Used to turn on and off the cruise con-
trol.
B- “SET -” switch
Used to reduce the set speed and to set
the desired speed.
C- “RES +” switch
Used to increase the set speed and to re-
turn to the original set speed.
D- “CANCEL” switch
Used to deactivate the set speed driving.
NOTE
l
When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
E00609302573
1. With the ignition switch in the “ON” po-
sition or the operation mode in ON,
press the CRUISE CONTROL ON/OFF
switch (A) to turn on the cruise control.
The indicator display appears on the in-
formation screen of the multi-informa-
tion display.
Cruise control
6-56
OGKE18E1
Starting and driving
6
To Next Page
Loading...
