Lane Departure Warning
(LDW)*
E00635701122
By recognizing through a sensor (A) the lane
in which your vehicle is running, the Lane
Departure Warning (LDW) gives you a warn-
ing when your vehicle is likely to drift from
its lane with an audible alarm and a visual
alarm displayed on the information screen of
the multi-information display.
For details about handling the sensor, refer to
“Handling of the sensor” on page 6-86.
How to operate LDW
E00635801136
The indication on the information screen of
the multi-information display changes as fol-
lows depending on the state of the system.
To turn on/off the LDW
NOTE
l
The LDW is turned on when the vehicle is
shipped from the factory.
l
The currently selected LDW setting (on or
off) is stored even when the ignition switch
is turned to the “LOCK” position or the op-
eration mode is put in OFF.
To turn on the LDW, press the LDW switch.
The indicator (white) appears on the infor-
mation screen of the multi-information dis-
play.
To turn off the LDW, press the LDW switch.
The indicator on the information screen of
the multi-information display will then go
out.
To return the LDW to “ON”, press the LDW
switch again.
Standby state
In the standby mode, the system is capable of
recognizing the lane in which your vehicle is
positioned and issuing audible warning when
your vehicle goes out of the lane.
Lane Departure Warning (LDW)*
6-101
OGKE18E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
