EasyManuals Logo
Home>Mitsubishi>Automobile>ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017 User Manual

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #397 background imageLoading...
Page #397 background image
FULL
LOW
*: Front of the vehicle
5. Add coolant to the radiator and/or re-
serve tank if necessary. (Refer to the
“Maintenance” section.)
WARNING
l
Make sure that the engine has cooled
down before removing the radiator cap
(C), because hot steam or boiling water
otherwise will gush from the filler port
and may scald you.
CAUTION
l
Do not add coolant while the engine is hot.
Suddenly adding cold coolant could damage
the engine. Wait for the engine to cool
down, then add coolant a little at a time.
6. Examine the radiator hoses for coolant
leakage and the drive belt for looseness
or damage.
If there is anything wrong with the cool-
ing system or drive belt, we recommend
you to have it checked and repaired.
Tools and jack*
E00800902800
Storage
The tools and jack are stored under the lug-
gage floor board of the luggage compartment.
The storage location of the tools and jack
should be remembered in case of an emer-
gency.
Vehicles with spare wheel
1- Tools
2- Jack
Vehicles with tyre repair kit
1- Tools
2- Jack
Tools
1- Jack bar
2- Wheel nut wrench
Tools and jack*
8-05
OGKE18E1
For emergencies
8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi ECLIPSE CROSS 2017 and is the answer not in the manual?

Mitsubishi ECLIPSE CROSS 2017 Specifications

General IconGeneral
BrandMitsubishi
ModelECLIPSE CROSS 2017
CategoryAutomobile
LanguageEnglish

Related product manuals