Set the switch according to the following ta-
ble.
CAUTION
l
Always perform adjustments before driving.
Do not attempt to adjust while driving, as it
could cause an accident.
Vehicle condition Switch position
2WD 4WD
“0”
“0”
Vehicle condition Switch position
2WD 4WD
“2”
“3”
“4” “3”
●:1 person
:Full luggage loading
[Vehicles with 2WD]
Switch position
0-
Driver only/Driver + 1
front passenger
Switch position
2-
5 passengers (including
driver)
Switch position
3-
5 passengers (including
driver) + Full luggage
loading
Switch position
4-
Driver + Full luggage
loading
[Vehicles with 4WD]
Switch position
0-
Driver only/Driver + 1
front passenger
Switch position
2-
5 passengers (including
driver)
Switch position
3-
5 passengers (including
driver) + Full luggage
loading/Driver + Full lug-
gage loading
Automatic headlamp levelling
(vehicles with LED headlamps)
E00517601610
This mechanism automatically adjusts the di-
rection of the headlamps (beam position) de-
pending on changes in the condition of the
vehicle, such as the number of occupants or
luggage weight. When the headlamps are il-
luminated with the ignition switch or the op-
eration mode in ON, the beam position of the
headlamps is automatically adjusted when the
vehicle is stopped.
Headlamp levelling
5-63
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
Need help?
General
