EasyManua.ls Logo

Mitsubishi ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Around the driver’s seat
E08500801746
1-Combination headlamps
Rotate the switch to turn on the lamps.
AUTO
With the ignition switch or the
operation mode is in ON, head-
lamps, position, tail, licence
plate and instrument panel
lamps turn on and off automati-
cally in accordance with outside
light level. {Daytime running
lamps will be turned on while
the tail lamps are off.} All
lamps turn off automatically
when the ignition switch is
turned to the “LOCK” position
or the operation mode is put in
OFF.
Position, tail, licence plate and
instrument panel lamps on
Headlamps and other lamps go
on
Refer to “Combination headlamps and
dipper switch” on page 5-55.
1-Turn-signal lever
The turn-signal lamps flash when the lever is
operated
1- Turn-signals
2- Lane-change signals
Refer to “Turn-signal lever” on page
5-64.
2-Steering wheel height and
reach adjustment
1. Release the lever while holding the
steering wheel up.
2. Adjust the steering wheel to the desired
position.
Quick guide
1-16
OGKE18E1
Overview/Quick guide
1

Table of Contents

Related product manuals