NOTE
l
Operate the individual switches correctly
and one after another.
The ACC may be turned off or its control
function may be cancelled if two or more
switches are pressed concurrently.
Driving aid display
E00634901097
1- ACC indicator:
Indicates that the ACC is ON.
2- Control state indicator:
Indicates that the ACC is active.
Two types of indication: “SET” and
“HOLD” (stationary vehicle hold state)
3- Set speed:
Indicates the target speed.
4- Vehicles in front symbol:
Comes on when the ACC detects a vehi-
cle ahead. Two types of indication:
“Stand by” and “Active”
Display
State
Stand by Active
Vehicle in
front detected
5- Following distance setting symbol:
Indicates the set following distance. Two
types of indication: “Stand by” and “Ac-
tive”
State
Stand by Active
State
Stand by Active
How to use ACC
E00635001330
To start up (place in standby
state) the system
With the ignition switch or operation mode
set to “ON”, press “ACC ON/OFF” switch
shortly to activate the ACC.
Adaptive Cruise Control System (ACC)*
6-70
OGKE18E1
Starting and driving
6
To Next Page
Loading...
