NOTE
l
The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
l
While the brake pedal is depressed, the vehi-
cle will not start moving again even if the
driver operates the switches.
To change the following dis-
tance setting
E00638400107
Every time you press the ACC following dis-
tance setting switch, the set following dis-
tance changes in order. Even after turning off
the ACC system or putting the operation
mode in OFF, the system retains your last se-
lected following distance setting in memory.
NOTE
l
The following distance varies as a function
of the speed; the faster the set speed, the lon-
ger the following distance.
Following distance setting
To activate cruise control (au-
tomatic speed control)
E00638500153
If you hold the “ACC ON/OFF” switch
pressed with the ignition switch or operation
mode set to “ON” and the ACC in the OFF
state, the cruise control is activated. The in-
formation screen of the multi-information
display then changes to the cruise control
screen and a buzzer sounds at the same time.
Cruise control is turned off if you set the ig-
nition switch to the “LOCK” or the operation
mode to “OFF”. Cruise control is turned off
if you set the ignition switch or operation
mode to “OFF”.
Refer to “Cruise control (automatic speed
control system)” on page 6-55.
CAUTION
l
Cruise control (automatic vehicle speed con-
trol system) does not alert by proximity
alarm and control distance between vehicles
to the vehicle in front.
Adaptive Cruise Control System (ACC)*
6-77
OGKE18E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
