Therefore when there is an obstacle on the
upward slope, it appears farther than its ac-
tual position.
A- Actual objects
B- Objects shown on the screen
When there is a downward slope behind
the vehicle
The reference lines are displayed farther than
the actual distance.
Therefore when there is an obstacle on the
downward slope, it appears closer than its ac-
tual position.
A- Actual objects
B- Objects shown on the screen
When solid objects are located close to the
vehicle
When solid objects are located close to the
vehicle, the displayed distance on the screen
may differ from the actual distance.
Because the reference lines do not contact the
body of the truck, it looks as if it would not
hit the vehicle in following illustration.
However, the vehicle may hit the truck be-
cause the body of the truck strays onto the
course in reality.
Multi Around Monitor*
6-123
OGKE18E1
Starting and driving
6
To Next Page
Loading...
Need help?
General
