NOTE
l
When the demister switch is pressed, the air
conditioning system automatically operates
and outside air (as opposed to recirculated
air) is selected. This automatic switching
control is carried out to prevent misting of
the windows even if “Disable automatic air
conditioning control” or “Disable automatic
air control” is set. (Refer to Customizing the
air conditioning ® p. 7-16.)
Operating the system in auto-
matic mode
E00773100102
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Press the AUTO switch.
2. Set the temperature control switch to the
desired temperature.
Press the OFF switch to turn off the air con-
ditioning system.
The mode selection, blower speed adjust-
ment, recirculated/outside air selection, tem-
perature adjustment, and air conditioner
ON/OFF status are all controlled automatical-
ly. When the AUTO switch is pressed, the in-
dication lamp (A) comes on.
NOTE
l
If the blower speed selection switch, A/C
switch, MODE switch, or air selection
switch is operated while the system is oper-
ating in the AUTO mode, the activated func-
tion overrides the corresponding function of
automatic control. All other functions re-
main under automatic control.
l
Never place anything on top of the interior
air temperature sensor (B), which will pre-
vent it from functioning properly.
Operating the system in man-
ual mode
E00773300061
Blower speed and ventilator mode may be
controlled manually by setting the blower
speed selection switch and the MODE switch
to the desired positions.
Adjusting the blower speed
E00773400075
Press of the blower speed selection
switch to increase the blower speed.
Press of the blower speed selection
switch to decrease the blower speed.
The selected blower speed (A) will be shown
in the display.
Dual-zone automatic climate control air conditioning*
7-12
OGKE18E1
For pleasant driving
7
To Next Page
Loading...
Need help?
General
