Select a Service
1. Hold down the key or the key.
Receives the lead services of the ensem-
bles that can be received.
2. Press the
key or the key to select
the service.
key
(hold down)
Automatically re-
ceives lower lead
services within en-
sembles that can be
received.
key
(hold down)
Automatically re-
ceives higher lead
services within en-
sembles that can be
received.
key
Switches to lower
services.
key
Switches to higher
services.
NOTE
l
Going to the first service or last service
within the ensemble switches to the next en-
semble.
Register the Service
Register the service in advance, and select
this at a later time.
1. Tune in to the service to register.
2. Hold down any of the keys from the
1RPT key to the 6
key.
A “Beep” sounds, and the preset key is
registered.
NOTE
l
If a preset key that already has a service reg-
istered is selected, then this is overwritten
with the new preset.
l
Pressing the preset key will select the previ-
ously registered service.
Search for a Service
Search for ensembles and services that can be
received.
1. Turn the /SEL key to select the en-
semble
2. Press the
/SEL key.
The service name within the selected en-
semble is displayed.
3. Turn the /SEL key to select the serv-
ice.
4. Press the
/SEL key.
Receive the selected service.
NOTE
l
If the text information for the service name
cannot be obtained, then nothing is dis-
played.
l
If there is no operation for 10 seconds, then
service search mode will be cancelled.
PTY Search
Select PTY (program content), and automati-
cally scan for services.
1. Press the PTY/SCAN key.
This switches to the PTY selection
mode.
2. Turn the /SEL key to select PTY.
3. Press the
key or key.
This starts PTY search.
key
Lower PTY search
starts.
key
Higher PTY search
starts.
NOTE
l
When selecting PTY, press any of the keys
from the 1RPT key to the 6 key to
switch to the PTY registered as a preset.
Listening to DAB*
7-37
OGKE18E1
For pleasant driving
7
To Next Page
Loading...
Need help?
General
