NOTE
l
On
vehicles with CVT, the starter will not op-
erate unless the selector lever is in the “P”
(PARK) or “N” (NEUTRAL) position.
On vehicles with Twin Clutch SST, the start-
er will not operate unless the gearshift lever
is in the “P” (PARK) position or the gear-
shift lever is in the “N” (NEUTRAL) posi-
tion with the brake pedal depressed.
For safety reasons, start the engine in the “P”
(PARK) position so that the wheels are locked.
6. While
pushing the lock release button (A), re-
move the cover of the ignition switch.
7. Insert
the emergency key into the ignition
switch.
8. Insert the keyless operation key into the emer-
gency key.
9. After
turning the emergency key with the key-
less operation key to the “ON” position,
make sure that all warning lamps are function-
ing properly before starting the engine.
10. Turn the emergency key with the keyless op-
eration key to the “START” position without
depressing the accelerator pedal, and release
it when the engine starts.
NOTE
l
Minor noises may be heard on engine start-
up. These will disappear as the engine warms
up.
11. Remove the keyless operation key from the
emergency key.
Locking and unlocking
1-21
1
To Next Page
Loading...
