Mitsubishi MA Series User Manual

17
V. How to Select Functions of remote controller
COOL DRY FAN HEAT
*1
AUTO
*1
■
Display example when auto mode is set to ON
If AUTO MODE DISP C/H is ON (see 4.4.3), it takes about 10 seconds before the
display is switched from one mode to another.
COOL DRY FAN HEAT
*1
●
Screen display when auto mode is set to ON
(1) Press the
ON/OFF
button.
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the
MODE
button.
Each time the
MODE
button is pressed, the operation mode switches from one to another. “AUTO” is also displayed.
*1: If the remote controller is connected with the unit for cool operation only, “AUTO” and “HEAT” will not be displayed, nor will
it be possible to select them.
●
Screen display when auto mode is set to OFF
(1) Press the
ON/OFF
button.
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the
MODE
button.
Each time the
MODE
button is pressed, the operation mode switches from one to another, but “AUTO” is not displayed.
*1: If the remote controller is connected with the unit for cool operation only, “HEAT” will not be displayed.

Mitsubishi MA Series Specifications

General

Type	Remote Control
Compatibility	Mitsubishi MA Series Air Conditioners
Frequency	Infrared
Operating Range	Approx. 7 meters
Battery Type	AA