3-204
Features and controls
3
Other interrupt displays (With ignition switch in the “ON” position)
N00558200196
The operation status of each system is displayed on the information screen. For further details, refer to the appropriate page for each
system.
Screen type 1 Screen type 2 System operation status Reference
● When “2WD” drive mode is selected
with the drive mode selector.
Refer to “Electronically controlled 4WD
system” on page 3-112.
● When “4WD AUTO” mode is selected
with the drive mode selector.
● When “4WD LOCK” mode is selected
with the drive mode selector.
● When the Active stability control
(ASC) is operating.
Refer to “Active stability control (ASC) ” on
page 3-136.
BK0122500US.book 204 ページ ２０１０年５月１２日 水曜日 午前１１時１１分
To Next Page
Loading...
