To Next Page

To Previous Page

5-18

Comfort controls

Air selection switch

N00736800309

Normally, use the outside position to keep the windshield and

side windows clear and to quickly remove fog or frost from the

windshield.

To change the air selection, simply press the air selection

switch. A sound will be made every time you push the switch.

● Outside air {Indicator light (A) OFF}

● Recirculated air {Indicator light (A) ON}

When the air conditioning turns on, the air selection is con-

trolled automatically.

The air selection indicator light (A) shows the selected posi-

tion.

OTE

● When the air conditioning operates with the air selection

switch in the outside position, the system automatically

determines whether to continue using outside air or to per-

form recirculation.

If the outside temperature is high, the system selects recir-

culation to achieve rapid cooling and causes the air selec-

tion indicator in the switch to illuminate. Press the air

selection switch to return to outside air.

If the outside air is dusty or contaminated in some way, use the

recirculation position. Switch to the outside air position every

now and then to keep the windows from fogging up.

OTE

● While the mode selection dial is set to the “ ” position,

the air conditioning compressor will run automatically.

The outside air position will also be selected automati-

cally.

CAUTION

● Using recirculated air for a long time may cause the

windows to fog up.

BK0122500US.book 18 ページ２０１０年５月１２日　水曜日　午前１１時１１分

Mitsubishi OUTLANDER User Manual

Other manuals for Mitsubishi OUTLANDER