PRECAUTIONS BEFORE SERVICE
GENERAL
0-3
SPECIAL TOOLS
M6001000400031
If other tools are substituted for the special tools to
do service of repair work, there is the danger that
vehicle parts might be damaged, or the technician
might be injured; therefore, be sure to use the spe
-
cial tool whenever doing any work for which the use
of one is specified.
PARTS TO BE REPLACED
M6001000500027
If any of the following parts are removed, they must
be replaced with new parts.
• Oil seals
• Gaskets (except rocker cover gasket)
• Packings
• O-rings
• Lock washers
• Split pins
• Self-locking nuts
PARTS
M6001000600024
When replacing parts, use MITSUBISHI genuine
parts.
TUBES AND OTHER RUBBER PARTS
M6001000700021
Be careful to avoid spilling any petrol, oil, etc.,
because if it adheres to any tubes or other rubber
parts, they might be adversely affected.
LUBRICANTS
M6001000800028
In accordance with the instructions in this manual,
apply the specified lubricants in the specified loca
-
tions during assembly and installation.
BRAKE FLUID
M6001000900025
Be careful to avoid spilling any brake fluid, because if
it adheres to the vehicle body, the paint coat might be
discoloured.
AC305593
AC305594
AC305284
AC305595
AC305596
AC305285
To Next Page
Loading...
