OPERATIONS UNDER THE VEHICLE
PERIODIC INSPECTION AND MAINTENANCE
2-27
B9. CHANGE GEAR OIL IN TRANSFER
CASE (4WD)
M6020300900252
1. Remove the filler plug.
2. Remove the drain plug and drain the oil.
3. Tighten the drain plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
4. Fill with specified oil till the level comes to the
lower portion of oil filler plug hole.
Specified transfer oil:
Gear oil API classification GL-4 SAE 75W−
85W
Quantity: 2.8 L
5. Tighten the oil filler plug to the specified torque.
Tightening torque: 32 ± 2 N⋅ m
B10. CHECK GEAR OIL LEVEL IN FRONT
AND REAR DIFFERENTIAL
M6020301000315
FRONT DIFFERENTIAL
1. Remove the under cover and filler plug.
2. Check that gear oil level is not 8 mm below the
bottom of filler plug hole
3. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
REAR DIFFERENTIAL
1. Remove the filler plug.
2. Check that gear oil level is not 5 mm below the
bottom of filler plug hole.
3. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
B11. CHANGE GEAR OIL IN FRONT AND
REAR DIFFERENTIAL
M6020301100356
FRONT DIFFERENTIAL
1. Remove the under cover and filler plug.
2. Remove the drain plug and drain oil.
3. Tighten the drain plug to the specified torque
Tightening torque : 65 ± 5 N⋅ m
4. Add the oil until the level comes to the lower
portion of the filler plug hole.
Specified lubricant:
Gear oil API classification GL-5 or higher
Above 10° C: SAE 90
Below 10° C: SAE 80W
Quantity: 1.15 L
5. Tighten the filler plug to the specified torque.
Tightening torque : 50 ± 10 N⋅ m
REAR DIFFERENTIAL
1. Remove the filler plug.
2. Remove the drain plug and drain oil.
3. Tighten the drain plug to the specified torque.
Tightening torque : 65 ± 5 N⋅ m
AC604828
AB
Drain plug
Filler plug
AC102739AB
8 mm
Upper
limit
Lower
limit
Gear oil
AC102739
AG
5 mm
Upper
limit
Lower
limit
Gear oil
AC608839
<Front>
AB
<Rear>
Filler plug
Filler plug
Drain plug
Drain plug
To Next Page
Loading...
