Mitsubishi PLK-E03BT - Troubleshooting Sewing Conditions (Page 45); Work Holder Issues; Distorted Sewing Patterns; Work Holder Not Stopping at Home Position

－40－
APPENDIX
Tabletop and stand drawings.
Ref.1 ···············Table cut-out for PLK-E03BT machine
Ref.2 ···············Table and stand
Ref.3 ···············Stand components
NOTE Tabletop and stand must be produced refer to below drawings.
Recommendable measurements for original MITSUBISHI tabletop and stand are
shown in the figures.