Mitsubishi PUHY-P250YJM-A - X LED Monitor Display on the Outdoor Unit Board; Service Monitor LED Interpretation

[ IX Troubleshooting ]
- 206 -
HWE1018A GB
(2) Attach the V-belt, and temporarily tighten the Bolt 1 (two places).
(3) Tighten the Bolt 2 so that the V-belt tension is proper, and then tighten the Bolt 1.
Refer to the following table for the V-belt tension.
(4) Reconnect the motor wiring.
Belt tension
Power source
frequency
[Hz]
50
60
50
60
15.5~16.5
14.5~15.5
20.0~22.5
19.5~21.0
5.0~5.5
5.0~5.5
5
4.5~5.0
Deflection
force
W [N]
Amount of
deflection
L [mm]
Model Name
PFD-P250VM-E
PFD-P500VM-E