Mitsubishi QJ71MT91 User Manual

7 - 4 7 - 4
MELSEC-Q
7 PARAMETER SETTING
YES
NO
NO
YES
2)
3)
YES
NO
Will the initial values of
the basic parameters be
changed?
Turn ON b0 (the basic parameter starting
method) of the communication condition
setting (Switch 2) (Refer to Section 6.6).
Create a sequence program for basic
parameter setting (Refer to Chapter 9).
Will the automatic
communication function
be used?
Create a sequence program for automatic
communication parameter setting (Refer
to Chapter 9).
Will the initial values
of the MODBUS device
assignment parameters
be changed?
Create a sequence program for MODBUS
device assignment parameter setting
(Refer to
Chapter 9 ).
Turn OFF b0 (the basic parameter starting method)
of the communication condition setting (Switch 2)
(Refer to Section 6.6).
Turn OFF b1 ( MODBUS device assignment
parameter starting method) of the communication
condition setting (Switch 2) (Refer to Section 6.6).
R
R
Turn ON b1 ( MODBUS device assignment
parameter starting method) of the communication
condition setting (Switch 2) (Refer to Section 6.6).
R
R

Mitsubishi QJ71MT91 Specifications

General

Brand	Mitsubishi
Model	QJ71MT91
Category	Controller
Language	English