Mitutoyo BM1 Series - Wringing Gauge Blocks; Disengaging Wringed Gauge Blocks

15
No. 99MAK004B
2 How to Use Gauge Blocks
4 Wring the 30 mm Gauge Block and other Gauge Blocks together in order of thickness.
Tips
When wringing a thin Gauge Block, check the state of the measurement surface of
the thin Gauge Block by placing on the optical at.
For details about wringing, see "2.2 Wringing" (page 16).
5 Perform thermal stabilization.
6 Use as a reference gage.
Example of comparative
measurement
Example of zero-setting for a
measuring tool
37.785
37.793
Workpiece
Reference gage (wrung Gauge Blocks)
Measuring tool
Wrung Gauge Blocks
■ Disassembly
1 Disengaging the wringing
1 Rotate the wrung Gauge Blocks until they form
a cross shape.
2 Slide the Gauge Blocks to detach them.
2 Wipeanydirto󰀨theGaugeBlocks.
Tips
For details about cleaning, see " Cleaning" (page 19).