To Next PageTo Next Page
Need help?Do you have a question about the Mitutoyo BM1 Series and is the answer not in the manual?
General| Model | BM1 Series |
|---|---|
| Type | Bench Micrometer |
| Frame | Cast iron |
| Resolution | 0.001mm |
| Accuracy | ±0.002mm, ±0.0001" |
| Measuring Force | 5-10 N |
Details the intended audience and the manual's purpose for users.
Explains symbols and notices for safety warnings and property damage.
Details conventions for important tips, notes, and references within the document.
Defines usage of round brackets, quotation marks, and numbered lists for clarity.
Warns against applying external forces to prevent product breakage.
Specifies the product's use as a length reference gage and handling precautions.
Emphasizes the importance of thermal stabilization when using the product.
Outlines cleaning steps after use and recommended solvents/oils.
Provides guidance on exporting products to European countries.
Introduces gauge blocks as length reference gages and their basic properties.
Explains different grades of gauge blocks based on dimensional accuracy.
Describes the composition of standard gauge block sets.
Demonstrates assembling a reference gage using gauge blocks.
Provides essential precautions for assembling gauge blocks to ensure even wear.
Lists required gauge blocks and tools for assembly and wringing.
Details the process of checking for burrs using an optical flat.
Explains the method for removing burrs using a Ceraston tool.
Describes the steps for wringing gauge blocks to form a reference gage.
Provides instructions on how to disengage wrung gauge blocks.
Details specific procedures for wringing different types of gauge blocks.
Covers checking appearance for dirt, scratches, wear, and burrs.
Details how to clean gauge blocks and apply anti-rust oil.
Presents dimensional diagrams and specifications for Rectangular and Square Gauge Blocks.
Shows detailed cross-sections and dimensions for different types of gauge blocks.
Details the material properties like hardness, thermal expansion, and strength.
Describes steel and ceramic gauge blocks with accurate thermal expansion.
Highlights ceramic gauge blocks with minimal thermal expansion.
Lists accessories for burr removal and wringing.
Defines terms commonly found in gauge block inspection reports.
