No. 99MAK004B
Notice regarding this document
y Mitutoyo Corporation assumes no responsibilities for any damage to the product,
caused by its use not conforming to the procedure described in this document.
y Upon loan or transfer of this product, be sure to attach this document to the product.
y In the event of loss or damage to this document, immediately contact the agent where
you purchased the product or a Mitutoyo sales oce.
y Read this document thoroughly before operating the product. In particular, be sure
to fully understand "Safety Precautions" on page 4 and "Precautions for Use" on
page 4.
y The contents of this document are based on information current as of January 2023.
y No part or whole of this document may be transmitted or reproduced by any means
without prior written permission of Mitutoyo Corporation.
y Some screen displays in this document may be highlighted, simplied or partially omit-
ted for convenience of explanation. In addition, some of them may dier from actual
ones to the extent that no user will misunderstand the functions and operations.
y The corporation, organization and product names that appear in this document are
their trademarks or registered trademarks.
© 2018-2023 Mitutoyo Corporation. All rights reserved.
Product names and model numbers covered in this document
This document is included with the following products.
Product name Model number
Rectangular Gauge Block set (steel, millimeter units) BM1-XXX
Rectangular Gauge Block set (ceramic, millimeter units) BM3-XXX
Square Gauge Block set (steel, millimeter units) BM4-XXX
Rectangular Gauge Block set (steel, inch units) BE1-XXX
Rectangular Gauge Block set (ceramic, inch units) BE3-XXX
Square Gauge Block set (steel, inch units) BE4-XXX
Square Gauge Block set (ceramic, inch units) BE6-XXX
To Next Page
Loading...
