4
No. 99MAK004B
Safety Precautions
Read these "Safety Precautions" thoroughly before operating the system to use
it properly.
These safety precautions include such information as to prevent an injury to
the operator and other persons or damage to property. Be sure to observe the
precautions.
Do not exert external forces to this product. Doing so may cause breakage.
Precautions for Use
■ Product applications and handling
● This product is a length reference gage (end standard).
Do not use it for any purposes other than its prescribed usage as a length
reference gage.
● This product is precision equipment.
y It must be carefully handled. Be careful not to apply excessive shock or force
to any of the parts during storage or use.
y If an excessive impact is applied, the center dimensions or the range of
dimension dierences, etc., may be aected. Have calibration performed to
check the dimensions.
y Before use, use a soft cloth soaked in solvent, etc., to wipe o any dirt or
rust-proong oil. Do not use organic solvents such as thinner or benzine.
y If rusting occurs on the sides of this product, wipe the rust o with a soft
cloth. Do not use sandpaper or polishing paper.
To Next Page
Loading...
